Highlifter Upper Radius Bar Kit Polaris RZR XP 1000 Spherical Bearing (12mm Bolt Size)

Keep your upper radius bar straight - like it was meant to be - with High Lifter's Upper Straight Radius Bars for Polaris RZR XP 1000.

Made from 1 ¼” x 3/16” DOM steel tubing, the Upper Straight Radius Bar is a beefy addition compared to the OEM bars (3/4”) and other competitors (1”). The simple bolt-on kit also features a 5/8” heim joint with a load rated at 17,955 pounds and polyurethane bushings for rugged durability in the deepest ruts and along the rockiest terrain.

Notes:

• 2017 Polaris RZR XP 1000 models have two different types of hardware connecting the rear factory radius bars: 10mm or 12mm bolts. Before purchasing radius bars for your 2017 Polaris RZR XP, you need to determine if you have 10mm or 12mm hardware. To determine this will be as simple as finding which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware you will use a 15mm socket. For 12mm hardware you will use an 18mm socket.
• This kit does not fit units that have 10mm factory bolts!