Home > Side by Sides > Polaris > RZR XP Turbo > Clutch Kits > Aftermarket Assassins RZR XP Turbo / Turbo S Snap Ring Delete Kit

Aftermarket Assassins RZR XP Turbo / Turbo S Snap Ring Delete Kit

Your Price: $20.00

In Stock.

Part Number:405-AA-SnapDeleteRZR

Quantity

If you are sick of dealing with the snap ring on your secondary clutch, we have the fix! The factory uses a snap ring to set belt deflection(tension) and that has proven to be inconsistent, has no adjustment, and are known to pop off and cause major belt issues. Not to mention the snap rings are easily damaged when removing, and can leave you waiting for parts. Anyone installing a clutch kit should grab one of these kits.
This snap ring delete kit allows you to adjust belt deflection on 2016-Up RZR XP Turbo Models
2019+ models come with a newly designed piece where the snap ring delete kit is not normally needed. However, the factory 2019 setup does not allow you to adjust your belt deflection. The snap ring delete kit is still beneficial for this year so you can set deflection.Comes with 2 thick shims and 2 thin shims
Shims make up the space over the transmission input shaft to set how far the clutch halves are spread apart
Most will use the two big shims only, but fine tuning can be done with the smaller shims if needed
The idea is to set your belt deflection as tight as possible without the secondary spinning in park or neutral
No more failing clips which make your belt deflection very loose causing poor performance and belt slip
Easier removal and installation of the secondary clutch when making adjustments
Fixes tight belt issues that some have from the factory
Helps when putting the 2017+ belt on the 2016 models